Polymer clay shape cutter | beach sea life ocean earring mould set | jellyfish starfish seashell swimmer seahorse mold | SORRENTO SET
PLEASE READ BEFORE PURCHASING
These cutters are available to purchase individually or as a bundle of 12 cutters
Included in the bundle:
Swimmer (se of 2 mirrored) 50mm x 12mm
Seahorse (set of 2 mirrored) 47mm x 23mm
Starfish 38mm diameter
Jellyfish (set of 5 pieces) - body 35mm x 20mm. Tentacles vary between 0.3mm and 0.6mm width x 20 to 40mm length
Florida seashell 41mm x 19mm
Calico seashell35mm x 28mm
The colours of the products you will receive might vary from the ones in the pictures.
★ PRODUCT & MATERIALS ★
These cutters are designed for polymer clay creations and they are extra sharp (0.3mm to 0.4mm cutting edge). None to little sanding required.
They are made of PLA, a biodegradable and biocompatible plastic that comes from renewable resources.
★ USE ★
Work and cut your polymer clay on a ceramic or glass tile to obtain best results. Do not work on baking paper.
Place your clay on the tile. For very details cutters, stroke the clay with corn flour before using the cutters (or dip the cutter in corn flour). This will prevent the clay from sticking to your cutter.
Cutters with embossing lines: the clay needs to be between 2.8mm and 4.5mm thick for the embossing lines to appear.
Place the cutter on the clay and press down. Make sure you press all the parts of the cutter and not only the sides. If the cutter has embossing lines make sure you press those as well into the clay. Make sure the cutter reaches your tile/table so that the clay separates completely. Remove the cutter from the top edges gently pulling straight up
A tool to press your cutter/stamp evenly is now available in our shop (look for pressing plate)
Remove the excess of corn flour before baking with a soft brush or a baby wipe. You can also clean your pieces with warm water and soap after baking.
Although these cutters are extra sharp and leave a very clean cut, a very little amount of sanding might be necessary. These cutters are handmade, imperfections might be present. Pleas note that the cutters are 3D printed and tiny bumps might be present where PLA filaments join.
★ CARE INSTRUCTIONS ★
PLA breaks at high-temperature environments so please don't expose the cutters to the sun and don't expose them to high-temperatures. Not dishwasher or oven safe. Do not soak and do not wash under very hot water.
Wash gently under soapy warm water. Use a needles or toothpick to remove any clay stuck in the sharp/small edges.
Do not stress beyond intended use. Do not apply horizontal pressure.
★ PROCESSING & SHIPPING
ITEMS ARE MADE TO ORDER SO THE PROCESSING TIME VARIES BETWEEN 3 TO 15 BUSINESS DAYS depending on the time of the year. I appreciate your patience and I promise it will be worth it :-)
FREE TRACKED SHIPPING AVAILABLE FOR CERTAIN ORDERS. IF YOUR ORDER QUALIFIES FOR FREE SHIPPING, THER DISCOUNT WILL BE AUTOMATICALLY APPLIED AT CHECK OUT.
🌈 SHIPPING OPTIONS: 2 options are available at the check out, please select the correct one for your requirements.
* STANDARD TRACKED SHIPPING
* EXPRESS TRACKED SHIPPING
Please note that Express refers to the shipping and not to the processing time, that will remain the same of the other parcels
UNTRACKED SHIPPING AT $4.50 IS AVAILABLE UPON REQUEST FOR SMALL ORDERS (WITHIN AUSTRALIA ONLY) - PLEASE MESSAGE US TO ARRANGE
Combined shipping available. If you purchase multiple items in a single purchase, you will pay shipping just once. If you have put through an order that hasn't been sent yet and you would like to add something, please message us and we will organise combined shipping.
Please note that all deliveries are potentially delayed due to COVID19, especially international deliveries. Unfortunately we have no control on the parcels once that they have been shipped, but we will happily assist you until when your parcel has safely arrived. All parcels are tracked and insured
★ SAFETY WARNING ★
This product is not a toy and it's not suitable for children of any age.
★ STAY CONNECTED ★
I'd LOVE to see the uses you make of your new tools. Please feel free to share your pictures and tag us on the social media.
Find me on instagram @phoenix_and_spruce for inspo, updates and discount codes.
And please feel free to message me with any suggestion or comment. I'd love to hear from you!
★ THANK YOU★
Purchasing this product you are supporting a small handmade business, a mum and a female entrepreneur. Woah. Thank you!
Freddy
Join our mailing list here to receive news, discount codes and exclusive deals: http://eepurl.com/h5G7lH